ISO 14067 Product Carbon Footprint: Guide for Exporters
Biovergent Associates · 12 November 2026 · 6 min read

ISO 14067 is the international standard that sets out how to calculate and report the carbon footprint of a product, meaning the total greenhouse gas emissions and removals across its life cycle, expressed in kilograms of CO2 equivalent per unit. For Indian exporters, it is the most widely recognised method to use when a buyer asks for a product carbon footprint (PCF), because it builds on the ISO 14040 and 14044 life cycle assessment standards and gives results that others can review and compare. This guide explains what the standard covers, how a study is done and how to get your data ready.
What is ISO 14067?
ISO 14067, titled 'Greenhouse gases: Carbon footprint of products: Requirements and guidelines for quantification', is published by the International Organization for Standardization. The current edition is from 2018. It tells you what to include, how to set boundaries, how to handle data and allocation, and what to report.
It is essentially a life cycle assessment that looks at only one impact category: climate change. That is why ISO 14067 refers back to ISO 14040 and ISO 14044 for the core LCA method, and adds rules that are specific to greenhouse gases.
What is a product carbon footprint?
A product carbon footprint is the sum of greenhouse gas emissions and removals linked to a product system, converted to CO2 equivalent using global warming potentials. It is stated per functional unit (for example, per kilogram of steel, per square metre of tile or per piece of a component) so that the result means something to the buyer.
A PCF is different from your company's GHG inventory. A corporate inventory covers all emissions of the organisation in a year. A PCF follows one product through its life cycle and allocates a share of shared emissions, such as plant electricity, to that product.
Why are Indian exporters being asked for ISO 14067 footprints?
Many global buyers have set climate targets and need product-level emissions data from suppliers to calculate their own Scope 3 emissions. A footprint based on an average emission factor tells them little; a supplier-specific PCF lets them see real differences between suppliers and track improvement.
Buyers also prefer a recognised standard because it makes results easier to check and compare. Some requests come through supplier questionnaires or procurement platforms, and some come with a request for third-party verification.
Note that a PCF is not the same as reporting under the EU Carbon Border Adjustment Mechanism (CBAM). CBAM uses its own methodology for embedded emissions in covered goods. An ISO 14067 study can reuse much of the same plant data, but it does not replace CBAM reporting. Check the latest EU rules for CBAM requirements.
Cradle-to-gate or cradle-to-grave: which boundary should you use?
ISO 14067 allows a full footprint covering the whole life cycle (cradle-to-grave) or a partial footprint covering selected stages, most commonly cradle-to-gate. The right choice depends on who will use the result.
- Cradle-to-gate: raw material extraction, inbound transport and your manufacturing, up to the factory gate. This is what most B2B buyers ask for, because they add their own downstream stages.
- Cradle-to-grave: adds distribution, use and end-of-life. This suits finished consumer products or products whose use phase matters, such as equipment that consumes energy.
- Whichever you choose, the report must state the boundary clearly so the number is not misread.
How is an ISO 14067 carbon footprint calculated?
A typical study follows the usual life cycle assessment phases, with greenhouse-gas-specific rules on top.
- Goal and scope: define the product, functional or declared unit, system boundary, cut-off criteria and intended use of the results.
- Inventory: collect activity data such as material inputs, energy use, fuels, transport, process emissions and waste, and choose emission factors from recognised databases.
- Allocation: where a plant makes several products, split shared inputs using the hierarchy in the standard, avoiding allocation where possible, then using physical relationships, and only then other relationships such as economic value.
- Impact assessment: convert each greenhouse gas to CO2 equivalent using IPCC global warming potentials, normally over 100 years.
- Interpretation and reporting: check data quality, run sensitivity checks on key assumptions and document everything in a study report.
What does ISO 14067 require you to report separately?
The standard asks for some results to be shown separately rather than hidden inside one total. These include fossil emissions, biogenic emissions and removals, and emissions from land use change where relevant. Biogenic carbon matters for products made from wood, paper, natural fibres or bio-based materials.
Carbon offsets and purchased credits are not part of the product carbon footprint under ISO 14067. If a company wants to talk about offsets, that has to be kept separate from the footprint figure.
What data should you prepare before starting?
The quality of a PCF depends mostly on primary data from your own operations. Gathering it early shortens the study and makes the result more defensible.
- Bill of materials for the product, with weights and material grades.
- Plant energy data: electricity from the grid and captive sources, fuels, steam, for at least one representative 12-month period.
- Production volumes by product line, to support allocation.
- Inbound transport details: supplier locations, modes and distances.
- Process emissions, refrigerant top-ups and waste quantities with their treatment routes.
- Any supplier-specific footprints you already receive for key raw materials.
Does an ISO 14067 footprint need verification?
ISO 14067 does not make third-party verification mandatory for every study, but many buyers and programmes ask for it, especially when the result is shared outside the company. A critical review or verification checks that the method, data and assumptions follow the standard. Planning for verification from the start, with clear documentation and traceable data, avoids rework later.
Frequently asked questions
What is ISO 14067 used for?
ISO 14067 is used to calculate and report the carbon footprint of a product, meaning its life cycle greenhouse gas emissions and removals in CO2 equivalent per functional unit. Companies use it to answer buyer requests for product-level emissions data, to compare product variants and to find where emissions can be reduced.
What is the difference between ISO 14067 and the GHG Protocol?
ISO 14067 is an international standard for product carbon footprints. The GHG Protocol is a family of standards; its Corporate Standard covers company-wide Scope 1, 2 and 3 emissions, and its Product Standard also covers product footprints. ISO 14067 and the GHG Protocol Product Standard are broadly similar in approach, and buyers often accept either, but you should confirm which one your buyer expects.
Is an ISO 14067 carbon footprint the same as an EPD?
No. An ISO 14067 study reports only climate change impact. An Environmental Product Declaration (EPD) follows ISO 14025 and product category rules, covers several environmental impact categories, and is verified and published through an EPD programme. Data from a PCF study can often be reused when a company later develops an EPD.
Free resources
Need help with this?
See our product carbon footprint services, or tell us what you are working on.
